Telecordia GR-63-CORE for network switching systems (NEBS)
For rack-component-level testing, your best bet is our quality temperature/humidity chambers ;Faster Temperature Cycling Chambersmodels. For fully loaded racks, a walk-in chamber is needed.
|
Paragraph
|
Title
|
Description
|
Benchtop Models
|
Reach-in Models
|
Other Models
|
|
5.1.1.1
|
Low-Temperature Exposure and Thermal Shock
|
Hold the equipment at -40°C for 72 hours, then remove to ambient room temperature
|
Almost every benchtop
|
Any quality temperature/humidity chambers
|
Walk-in
|
|
5.1.1.2
|
High-Temperature Exposure and Thermal Shock
|
Hold the equipment at 70°C for 72 hours, then remove to ambient room temperature
|
Any benchtop or ovens
|
Any quality temperature/humidity chambers or Faster Temperature Cycling Chambers
|
Walk-in
|
|
5.1.1.3
|
High Relative Humidity Exposure
|
Maintain 40°C and 90-95% RH for 96 hours, with controlled heat-up and cool-down
|
Any humidity model
|
Any quality temperature/humidity chambers
|
Walk-in
|
|
5.1.2
|
Operating Temperature and Relative Humidity
|
There are 14 steps to the test sequence, cycling from -5 to 50°C, as well as humidity. One step requires holding 5°C/<15%RH.
|
|
Any quality temperature/humidity chambers
|
Walk-in
|
|
5.1.3
|
Operating Altitude
|
Twelve step cycling test of temperature and humidity. 25°C to 50°C and up to 4,000 meters above sea level.
|
|
Altitude or Walk-in
|
Walk-in
|
Because 5.1.2 and 5.1.3 require your equipment to be operating, these become a challenging application for a test chamber due to the heat generated.
The altitude test is new for Issue 2 of this specification.
